Looking for a small, compact, bench top drill press that has the power to do any task you ask of it including tapping? The DP-4016B-VS is a 16" swing variable speed drill press that might just be what you are looking for. Unlike pulley-driven drills, this 16" drill press lets you run tooling at the proper speed to fit your application and extend tooling life.
- 3/4 hp motor requires 110-volt power and will work at virtually any shop or site.
- Inverter-driven head drills a maximum capacity of 3/4” steel.
- You can fine-tune the speed in the range from 0 to 2100 rpm to suit your application.
- Auto-reversing tap has a tapping capacity of 1/2” steel.
- 2-3/4" wide steel column eliminates flexing even when drilling at full capacity.
- Rigid cast iron base and table add strength to the drill’s structure.
- The table even tilts left or right to 45 degrees.
- Includes a safety shield around the drill head to protect you.
- Baileigh backs this bench-top drill press machine with a 1-year parts warranty and lifetime technical support by phone from our experienced team.
SPECIFICATIONS
| Item Number | DP-4016B-VS |
|---|---|
| Maximum Load Capacity | 132 lbs |
| Spindle Speeds | Variable |
| Drilling Capacity | 3/4" Mild Steel |
| Swing | 16" |
| Distance from Spindle to Table | 13.18" |
| Distance from Spindle to Base | 22.83" |
| Diameter of Column | 2-3/4" |
| Spindle Taper | MT2 |
| Spindle Travel | 3.93" |
| Spindle Speed Range | 0 – 2100 rpm |
| Table Size | 11.14” x 9.76” |
| Base Size | 10.63” x 10.03” |
| T-Slot Width | 2 @ .531" |
| Overall Size | 29.13" x 17.52" x 41.33" |
| Table Angle Adj | L or R 45 Degrees |
| Chuck Capacity | .03" - .625" (B16) |
| Power | 110 Volt |
| Shipping Weight | 275 lbs |
| Rotating Head | Yes (360 degrees) |
| Speeds | 16 |
| Shipping Dimensions (Inches) | 48" x 30" x 21" |
