With a welded cast-steel framework, this hydraulic press is a must-have for any engineering workshop, repair firm, or technical training institutions.
- 110-ton maximum capacity.
- 59” working width.
- 8”-diameter cylinder with 13.75” stroke.
- 10 hp motor runs on 220-volt 3-phase power.
- 2 speeds and pressure regulator let you adjust to suit a given project.
- Cylinder moves left and right within the frame for off-center parts.
- Effortlessly adjust the height of the heavy work table using the hydraulic cylinder and lifting chains.
- 4.09” chrome piston with automatic return saves time after you’re finished applying pressure.
- Typically kept in stock for fast shipping.
- Delivery in accordance with CE standards.
- Baileigh covers this H-frame press with a 1-year parts warranty.
- Lifetime technical support by phone means that project troubleshooting and advice from our experienced team is just a call away.
Recommended for: General assembly, straightening work, testing workpieces, and pressing bearings in and out.
SPECIFICATIONS
| Item Number | HSP-110M-1500-HD |
|---|---|
| Return Speed | .23" / sec. |
| Maximum Pressure | 4375 psi |
| Motor | 10 hp |
| Piston Head Diameter | 4.09" |
| Pump Speed | 3.9 gal/min. |
| Oil Capacity | 35.65 gal |
| Working Speed | .15" / sec. |
| Working Width | 59" |
| Maximum Capacity | 110 tons |
| Cylinder Stroke | 13.75" |
| Cylinder Movable | Yes |
| Cylinder Diameter | 8" |
| Power | 220V / 3-phase |
| Shipping Weight | 4240lbs |
| Shipping Dimensions (Inches) | 96x48x97 & 48x45x53 |
