Save a lot of floor space in your shop with this benchtop 2-in-1 combination of an abrasive disc grinder and an abrasive belt grinder. Designed and built to very high standards, this machine will serve your shop for years to come.
- Powerful 1 hp motor requires 115-volt single-phase power and will work in almost any fabrication shop setting.
- 9" sanding disc.
- Long 48" x 2" belt stays cool longer.
- The abrasive disc grinder rotates at 3600 rpm and abrasive belt grinder rotates at 4712 fpm.
- Large product support tables can be angled up to 45° for mitering edges.
- Disc side includes miter push block for safety.
- Vacuum port for hooking up any standard shop vacuum to assist with dust collection.
- Belt grinder includes tension control and tracking adjustments as standard features, not upgrades.
- Baileigh backs this unit with a 1-year parts warranty and lifetime technical support.
- We typically keep disc and belt grinders in stock for fast shipments.
Recommended for: Smoothing over burrs on metal, chamfering edges for welding, and cleaning up castings, among other uses.
SPECIFICATIONS
Item Number | DBG-9248 |
---|---|
Working Table Size | 4-11/32" x 3" (Belt), 11-13/16" x 5-29/32" (Disc) |
Base Size | 9-1/2" x 8-1/16" |
Noise | 75dB @ 3' |
Motor Hp | 1 |
Table Angle Adj | 45° |
Belt Size L x W | 48” x 2” |
Belt Speed (ft./min.) | 4712 fpm |
Disc Diameter | 9" |
Disc Speed | 3600 rpm |
Power | 115V |
Shipping Weight | 100lbs |
Grit | 80 (Disc and Belt) |
Certification | CSA |
Shipping Dimensions (Inches) | 48x45x50 |
* specifications subject to change without notice.