- ISO 9001 certified
- Large spindle bore 4-1/8”
- 4-way rapid traverse on Longitudinal and cross ways
- All dual inch/metric dials.
- solid cast iron machine base
- Heavy Duty main motor 15 HP
- 12 spindle speeds from 25-1,600 rpm
- 54 kinds of inch threads and metric threads
- Threading and feeding rate change by levers
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- Tools box with leveling pads
- One year warranty for parts
Max. swing over bed
32”
Max. length of workpiece
80”
Max. swing over cross slide
22-7/16”
Max. Swing in gap
40-1/2”
Width of Bed
16”
Effective length in gap to spindle
10”
Effective length in gap to chuck jaws
7”
Spindle bore
4-1/8” , D1-8
Taper of spindle center
MT#5 with1:20 reducing sleeve
Spindle speeds
25-1,600 rpm / 12 steps
Longitudinal feeds
0.0016-0.055 IPR, 60 kinds
Cross feeds
0.0008-0.027 IPR, 60 kinds
Inch threads
80-7/16”TPI, 54kinds
Metric threads
0.45-120 mm , 54 kinds
Module threads
0.25-60 mm, 46 kinds
Diameter pitch threads
60-0.25 DP , 42 kinds
Max. travel of top slide
9-1/8”
Max. travel of cross slide
16-1/2”
Longitudinal rapid traverse
18 ft / min.
Cross rapid traverse
8 ft / min.
Diameter of tailstock quill
3-1/2”
Max. travel of tailstock quill
6”
Taper of tailstock quill center
M.T. # 5
Max. weight of workpiece
2,000 LBS
4-way tool post size
1” x 1”
Longitudinal leadscrew diameter / pitch
Diameter: 3” Pitch: 2 TPI
Main Motor
15 HP, 220V/40A / 440V/20A, 3 phase, prewired on 220V
Rapid traverse motor
1/3 HP, 220V/440V, 3 phase, prewired on 220V
Coolant pump motor
1/8 HP,220V/440V, 3 phase, prewired on 220V
Machine weight, approx.
9,350 LBS
Overall dimensions, LxWxH
146” x 48” x 67”
