Description
Basic 180 V is one of the heaviest machines in this popular market segment. With a bed width of 206 mm (8 in) and a 30 percent higher total weight, its solid construction has a positive effect on the processing quality. This lathe also enables heavier machining operations that meet industrial requirements. Equipped with an inverter, it can easily reach 3,000 revolutions per minute. The constant cutting speed function also ensures surface qualities comparable to that of a CNC lathe when facing.
Features
- Cast-iron bed, heavily ribbed
- All box ways are induction-hardened and precision-ground
- Headstock with D1-4' mount, bore diam. 1,5", run in 2 adjustable tapered roller bearings
- All gears are made of Cr-Ni steel, hardened, precision-ground, with oil-bath lubrication
- Tailstock can be moved ± 0.4 in for taper turning
- Guides are adjustable via tapered gibs
- Test certificate in accordance with DIN
- Including 3-axis position indicator, fully assembled
- 3-axis position indicator
- More accuracy
- Lower error rate
- Increased productivity
- Resulting in valuable time savings
- For increased productivity
- Easy to read display
- Operator-specific features
- Convenient keyboard layout
- Resolution: 0.0004 / 0.0002"
- Default coordinates
- Axis position is maintained when display is turned off
- Hole circle pattern calculation
- Calculator function
- Storage for 10 tools
- Radius / diameter toggle
- Mm/inch conversion
- Easy expansion and maintenance-free operation
- Display for top (Z0) and box way slide (Z1) both separate and in differential / cumulative mode for lathes
- Position indicator with speed display
- Infinitely variable spindle speed on 2 gear levels
- Speed up to 3000 rpm
- Constant cutting speed: speed adapts to the part radius - constant speed ensures uniform quality finish at any diameter.
- Main motor rating 5.5 Hp
Standard Equipment
- 3-axis position indicator
- 4-jaw face plate chuck Ø 8"
- Face plate Ø 12"
- Change gears
- Quick change tool holder head WE
- Quick change tool holder WED 20100
- Coolant system
- Steady and follow rests
- Chip tray
- Fixed splash guard (wall)
- Chuck guard
- Foot brake pedal
- Base
- LED work lamp
- Micrometer longitudinal stop
- Reducing sleeves
- Dead center
- Thread gauge
- Operating tools
- Operator instructions
Specifications
- Working Area
- Turning diameter over bed: 14”
- Turning-Ø over support: 9”
- Gap bridge length: 8”
- Bed width: 8”
- Center width: 39.37”
- Turning diameter over gap bridge: 20”
- Travels
- Travel X-axis: 7”
- Travel Z1-axis: 4”
- Swing range of top slide: ± 50°
- Headstock
- Spindle mount: Camlock D1-4
- Spindle bore: 1”
- Spindle taper: 5 MT
- Speed range, high: 550rpm – 3000 rpm
- Speed range, low: 30 rpm – 550 rpm
- Feed
- Feed X-axis: 0.00055”/R - 0.00811”/R
- Feed Z-axis: 0.00169”/R - 0.02571”/R
- Tapping
- Tapping, withworth: (28) 4-56 TPI
- Tapping, metric: (37) 0.02-0.3
- Tailstock
- Tailstock taper: 3 MT
- Tailstock quill stroke: 5”
- Tailstock quill diameter: 2”
- Tailstock traverse adjustment: ± 0.5”
- Drive Capacity
- Motor rating main drive: 5.4 Hp
- Measures and Weights
- Overall dimensions (length x width x height): 77” x 32” x 48”
- Weight: 1,936 lbs.
