Description
- Compound sliding table with scale and adjustable stops for coordinate drilling and light milling work
- Quiet operation with oil-bath lubricated gears for long tool life and durability
- The milling machine's high-quality spindle bearing can withstand higher loads for the long term
- Manual drill feed can be switched to high-precision feed via a hand-wheel
- Controllable automatic feed with 3 gear steps
- Adjustable height of gear head and table
- Table guides are adjustable with high precision via taper gibs
- Gear head swivels to both sides
- Cutter mounts are secured by a drawbar
- Tapping feature
- Integrated coolant system
Standard Equipment
- tapping unit
- table feed TV 1000
- draw bar
- drill chuck
- tool-holder bits
- coolant system
- operator manual
Specifications
| Working Area | |
| Drilling Capacity | 2" |
| Tapping Capacity, Steel | (ST 37) M16 |
| Travel Z1-Axis | 23" |
| Travel Z2-Axis | 23" |
| Table Set Up Area | 29" x 8" |
| Table Load Capacity | 220 lbs |
| T-Slot Table (qty x width x spacing) | 0.12" x 0.55" x 2.48" |
| T-Slot Foot (qty x width x spacing) | 0.08" x 0.55" x 7.87" |
| Quill Stroke | 5" |
| Spindle Nose-To-Table Surface Distance | 24" |
| Spindle Nose-To-Foot Distance | 46" |
| Throat | 11" |
| Column Diameter | 5" |
| Head Swivel Range | ± 45 ° |
| Travels | |
| Travel X-Axis | 20" |
| Travel Y-Axis | 7" |
| Headstock | |
| Speed Range | (12) 75 - 3,200 rpm |
| Spindle Mount | MK 4 / MT 4 |
| Rapid Feed | |
| Rapid Feed | 24" /min |
| Feed | |
| Work Feed | 0 - 17" /min |
| Drive Capacity | |
| Motor Rating Main Drive | 2 HP |
| Main Drive, Continuous Load | 1.48 HP |
| Motor Rating Coolant Pump | 0.1 HP |
| Measures and Weights | |
| Overall Dimensions | 33" x 30" x 73" |
| Weight | 858 lbs |
