D300XT Magnetic Tapping & Drilling Machine
VARIABLE SPEED MAGNETIC DRILLING & TAPPING MACHINE
The D300XT is a variable speed drilling machine designed to drill
holes with diameters of up to 2-3/4" (70mm) by using annular
cutters. The machine can also drill holes with diameters of up to
1"( 25mm) by using twist drill bits. The D300XT can change the
direction of rotation. This allows tapping of pre-drilled holes by
using a tap chuck. The electromagnetic base clamps the machine
to ferromagnetic surfaces, making sure that the operator is safe
and the machine works correctly. A safety strap protects the machine
from falling in case of a clamping loss. Accessories allow you to drill
in pipes and cut threads.
FEATURES
and diagnostic information, e.g. worn brushes
• 1600 W motor
• Overload & Overheat protection
• Tapping of through and blind holes with intelligent load control
• Drilling with both TCT & HSS cutters and twist
drill bits from small up to large diameters
• Full electronic motor control
• Electronic clutch (faster than mechanical)
• Rigid design extends tool life
• Innovative smart magnet with reduced weight
• Intuitive control panel at top of the drill
• Large coolant reservoir
** This drill ships via freight truck on a pallet and can only be
shipped to a commercial address
Description
- 2-15/16" (75 mm) depth of cut
- 1600 Watt motor with variable speed
- M20 (7/8") Max Tap Size
- Intuitive control panel at top of the drill
- 360-degree Visual Monitoring System
